I am testing the Xlinx JESD204-IP for interfacing the AFE7950EVM. My evaluation board is zcu102 and I connect afe7950evm to the HPC1 of zcu102. I am trying to use 8b/10b in the mode of subclass 1. I ...

I am using an ADS131A02 and an ESP32-PICO-KIT for my project. In this case, the ADS131A02 is in synchronous slave interface mode, as I will be using SCLK as iCLK. The problem is that I cannot get a ...

The two technologies are not compatible. Is there any reason an FPDlink SER cannot be used? I can provided compatible device to the ADI MAX96724/F/R.

* @note This function is empty by default. * This function is called after startup. * The user can use this function to implement the application.

I hope this message finds you well. We are currently utilizing Texas Instruments' mmWave radar in various radar systems and are now focused on the development of an in-cabin radar system. To expedite ...

We are using DAC81416 Digital to analog IC in one of our designs. We are not able to locate the Linux device driver for DAC81416. Please can you help us with the right device driver or any reference.

We will need an NDA to share an advance datasheet, please work through your local sales rep to obtain datasheet, with NDA. if there is a specific specification you are interested in, please let us ...

Can you please provide some guidance regarding the PCB Layout mentioned on page 36 of the THS4561’s data sheet. I am using the WQFN 10 pin package (the diagram on page 36 only shows the layout for the ...

C2000ware 5.02 地址变量为：COM_TI_C2000WARE_INSTALL_DIR，CCS12.2以上版本能够直接匹配识别！ 但是C2000ware4.03版本地址变量为：COM_TI ...

I have a slave (MC33772B) with which I want to communicate via SPI. This expects a message of 40 bits, but unfortunately my board can only send 16 bits. Is it still possible to send 40 bits with the ...

hex文件中用到0x8000的地址，应该是跟section的定义有关，如在cmd文件中配置为.TI.ramfunc，而实际移植程序时未修改，在ram中运行的地方还是用的ramfuncs。而通过hex2000转换告警的问题，还是没有定位 ...

Try to updated SBL at default location at 0x0 in OSPI flash. And, we have backup image at 0x40_0000 on OSPI as fall back SBL. If update at 0x0 is failed or not properly done. AM243x might have fall ...